What is Instant Gas Hot Water Systems?
What is Instant Gas Hot Water Systems? Discover the benefits and features of instant gas hot water systems. Learn how these efficient systems provide on-demand hot water, save energy, and
Hot Water Issues During Winter Answered
Discover common hot water issues during Australia’s busy winter season and learn how to keep your system running smoothly.
Winter in Australia is the busiest season for your hot water system. The water coming from your pipes is colder than normal along with the outside air temperature. This makes your hot water service work harder to produce sufficient hot water for your household.
Have you noticed a decline in the performance of your hot water system?
Common Problems with Your Water Heater During Winter
1. Hot Water Is Not Hot Enough
If your hot water heater seems to be getting colder quickly, and the temperature is not as it used to be, the following causes may be contributing to the problem:
- Defective Thermostat or Gas Control Valve: Defective thermostat in electric hot water systems or defective gas control valve in gas storage hot water systems. If any of these are parts is causing the hot water problem, contact a hot water plumber immediately for an emergency hot water parts replacement.
- Uninsulated Pipes: Uninsulated pipes connecting to your hot water system. Ambient temperature around the pipes, especially the hot water pipes cause heat loss as water travels to your taps and showers. Wrap these frozen pipes with the proper insulation.
- Cold Location for Hot Water Heater: Cold temperature in the area where your hot water heater is located. If your hot water tank is located outside your home, you can place a hot water heater blanket around the tank. This would prevent heat loss and help your hot water system to produce hot water at your desired temperature. If the hot water heater unit is inside your laundry room, it might be necessary to seal the room and not allow cold air to pass through.
If the above causes seem not to be the issue with your hot water heater, try adjusting the temperature higher by 5-10 degrees. To avoid scalding, test if the hot water temperature is to your liking by opening the farthest tap from your hot water system.
2. There Is No Hot Water
This hot water system problem is probably the most unpleasant. Literally, no one would like to endure a cold shower, especially at the height of winter.
Below are the most common causes:
- Broken Heating Element: Broken heating element: Your hot water plumber will use a multimeter to check the resistance of your heating element. If you have a twin element electric hot water system, he needs to check both. If there is no resistance or unsteady resistance reading from your hot water element. It is time for a hot water element replacement.
- Pilot Light Not On: The pilot light is not on: A defective thermocouple in the control gas valve is the most likely culprit. The thermocouple should be checked every 4 years as part of your hot water heater maintenance. When something is wrong with this part, it is better to call a gas hot water plumber to test and possibly replace it.
3. Sediment Buildup Inside the Tank
It is easy to determine when there are sediments inside your storage hot water systems. You might hear some popping noises every time your hot water unit is running. Your hot water heater needs thorough flushing to get rid of these sediments before this causes a major leak in your hot water tank.
4. Tankless Water Heaters Not Providing Endless Hot Water
There are several reasons why this may be the case. First, there is an issue with the cold water flow to or from your instant hot water system. The second reason is that there is a defect with the gas supply, that enough gas or gas pressure is being provided to the unit. On both occasions, a licensed gas fitter will be required to troubleshoot and fix the issue.
5. Solar Hot Water Heater Problems
If you are concerned that your solar hot water system is not giving off as much hot water during this season, you are not alone. Solar hot water heaters are great energy savers and you need to maximise the solar energy that it gets by doing the following:
- Make sure that a gas or electric booster is available during cloudy days.
- Installation of insulation/lagging to exposed pipes.
- Clean your solar panels, the cleaner the panels the better efficiency you will get.
Gets
$100* OFF
ON A NEW HOT WATER SYSTEM
TODAY!
*Contact us for more information about this promo.
Need Help with Hot Water Issues? Consult Our Specialists Today!
The Plumbing and Electrical Doctor represents a team of licensed plumbers and gas fitters available locally to cater to your hot water systems repair and installation. We service hot water systems to keep up with warranty conditions and provide emergency hot water repairs in Canberra and its neighbouring suburbs like Queanbeyan and areas in New South Wales.
Give us a call at 131091 or reach out to us through our website’s contact form.
Other Recent Articles on Hot Water Systems
What is a Tempering Valve?
What is a Tempering Valve? Discover the purpose and function of a tempering valve in plumbing systems. Learn how it ensures water temperature safety and improves efficiency in your home.
What is a Hot Water Anode?
What is a Hot Water Anode? Learn what a hot water anode, or ‘sacrificial anode,’ is and why it’s essential for maintaining the optimal condition of your hot water tank.
THE DOCTOR GETS IT DONE
General Plumbing & Electrical | Hot Water Systems | Blocked Drains | Gas Fitting & more. .